Product introduction

This low-voltage switchgear is suitable for power plants, substations, petrochemicals, metallurgical steel rolling, transportation energy, light industry and textiles and other factories, mining enterprises and residential communities, high-rise buildings and other places, as AC 50~60hz, rated working voltage AC 660v and The following power system power distribution equipment power conversion and power consumption equipment control.

This device complies with IEC439, VDE0660, GB7251, JB/T9661, IEC529 and other standards.

Environmental conditions for use

The altitude must not exceed 2000m.

The ambient temperature is not higher than +40°C, not lower than -10°C, and its average temperature shall not be higher than +35°C within 24h.

The relative humidity of the surrounding environment does not exceed 50% at +40°C on a day. At lower temperatures, higher relative humidity is allowed (for example, 90% at +20°C).

There is no conductive or explosive dust, no corrosive metal and insulating gas or steam at the operating location.

The inclination of the vertical surface of the equipment installation should not exceed 5 degrees.

The earthquake intensity does not exceed 8.

Model and its meaning

Structural Features

The basic cabinet frame is a combined assembly structure, all structural parts are galvanized, and the design is compact and can accommodate more functional units in a small space. It has strong versatility and flexible assembly. The module is 25mm C profile can meet the requirements of various structural types of protection level and use environment.

Using standard module design, it can be composed of standard units such as protection, operation, conversion, control, adjustment, measurement, indication, etc. Users can choose and assemble according to their needs, and more than 200 parts can form different schemes of cabinet structure and drawers. unit.

There are galvanized metal partitions with ventilation holes between the upper and lower drawers. The drawers are surrounded by flame-retardant engineering plastic partitions, so there is a strong insulation and isolation between adjacent circuits.

can be equipped with two sets of main busbars, which can be installed in the main busbar compartment of the switchgear. The two sets of busbars can be installed on the upper and lower parts of the back of the cabinet respectively. According to the wire entry requirements, the upper and lower sets of busbars can be made of different or the same cross-section materials. , The two can be powered separately, can also be used as a backup power source, or the main bus can be discharged in the upper bus compartment of the cabinet.

Main technical parameters

Outline and size of switch cabinet